Oven Repair (including Ranges and Cooktops)

bobfixit · #1 (**permalink**) 05-10-2008, 10:01 AM

My wife ran the auto self clean and when it finished it beeped once and the display panel went blank and the oven door remained locked. I have powe to range as the top burner ignite and light. How do I unlock the door and what could be my problem with the display panel? I pressed the puttons nothing happens.

bobfixit · #2 (**permalink**) 05-10-2008, 01:07 PM

is there now one out that can help, before I start digging in and taking things apart?

Gene · #3 (**permalink**) 05-10-2008, 06:46 PM

Bob,

Pull the range, remove the back cover and locate the thermal switch and the oven TOD. Check both parts for continuity. Replace any of them if it's open.

The thermal switch

The oven TOD

- The part number for the thermal switch is AP3799085

- The part number for the oven TOD is AP3086326

Gene.

bobfixit · #4 (**permalink**) 05-13-2008, 05:00 PM

Thanks Gene, The TOD was the problem. This site is greate help. And Gene you can't leave.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No power after self clean; door locked	mulean	Oven Repair (including Ranges and Cooktops)	8	03-30-2008 06:55 AM
Oven Door Locked	Planorez	Oven Repair (including Ranges and Cooktops)	0	01-12-2008 07:15 AM
Oven Door Latch Locked W/O Door	hseeger	Oven Repair (including Ranges and Cooktops)	2	12-28-2007 11:42 AM
My oven door just locked on it's own	Braidqueen	Oven Repair (including Ranges and Cooktops)	0	09-05-2007 01:33 PM
oven door locked	jmiller	Oven Repair (including Ranges and Cooktops)	2	07-20-2007 06:05 PM

oven door locked/no power to display panel

Oven Repair (including Ranges and Cooktops)

My wife ran the auto self clean and when it finished it beeped once and the display panel went blank