Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
normcopp  
#1 Posted : Tuesday, February 9, 2010 4:22:09 PM(UTC)
Quote
normcopp

Rank: Member

Groups: Registered
Joined: 2/9/2010(UTC)
Posts: 2

I carefully followed the instructions for converting the range from natural gas to propane. The burners on top work fine but I just could not get the oven and broiler flames adjusted. The oven is good enough to use, but the broiler covers the top of the oven with a sheet of flame that's dangerous. I tried turning the adjuster both ways and there seem to be little or no difference.:(
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, February 10, 2010 3:00:05 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Try to turn the Broil orifice more clockwise.

Gene.
The model number you posted does not come up. Verify and repost it if you need any further assistance.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
propane conversion (Dryer Repair)
by bonk 1/11/2010 8:27:54 AM(UTC)
Propane conversion Admiral cooktop (Oven Repair (including Ranges and Cooktops))
by cheetallanes 12/16/2008 1:37:38 PM(UTC)
W. Westinghouse Gas to Propane conversion (Oven Repair (including Ranges and Cooktops))
by BiffManchest 2/26/2008 2:47:31 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.