Discuss

Left back element does not heat

 in

Oven Repair (including Ranges and Cooktops)

. "

The element is good because it works in the other position. I replaced the switch and that was not the

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Oven Repair (including Ranges and Cooktops) » Left back element does not heat

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 05-03-2008, 02:47 PM
crlowder crlowder is offline
Junior Member
  
Join Date: May 2008
Posts: 4
crlowder is on a distinguished road
Default Left back element does not heat
Model Number: RS675PXEZ2   Brand: Whirlpool   Age: 5 - 10 years   
The element is good because it works in the other position. I replaced the switch and that was not the problem.The light comes on but the element does not heat.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
  #2 (permalink)  
Old 05-03-2008, 05:11 PM
misterfixall misterfixall is offline
Senior Expert
APP Volunteer
  
Join Date: Nov 2007
Location: brampton ontario outside of toronto
Posts: 391
misterfixall is on a distinguished road
Default
Did You Replace Block That Burner Goes In To
__________________
-
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 05-04-2008, 08:09 AM
crlowder crlowder is offline
Junior Member
  
Join Date: May 2008
Posts: 4
crlowder is on a distinguished road
Default
Will try that. Thanks.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 05-16-2008, 11:23 AM
crlowder crlowder is offline
Junior Member
  
Join Date: May 2008
Posts: 4
crlowder is on a distinguished road
Default
I replaced the block but that didn't fix it . then I replaced thr T-stat,S-unit
Part # AP2928086. That solved my problem.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
Reply

« oven not working | F-1 E2 Error on Display »


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Left back element does not heat crlowder Oven Repair (including Ranges and Cooktops) 0 05-03-2008 02:35 PM
Element won't heat up (20ohms on element and 120volts to the element)? puddlejumper123 Oven Repair (including Ranges and Cooktops) 0 04-22-2008 08:49 PM
how to remove back of dryer to replace heating element Carolyn Tolonese Dryer Repair 0 03-01-2008 07:20 PM
No Heat 3 Loads After Element Replacement jtagscott Dryer Repair 4 12-11-2007 02:36 PM
heating element won't heat up mark80 Oven Repair (including Ranges and Cooktops) 1 10-12-2007 03:31 AM


All times are GMT -7. The time now is 05:16 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15