[johnbrown]

Elements will not go down to low heat. Still too hot on low. Oven works fine. Local technician has replaced terminal block at incoming pigtail, and all 4 manual control switches. No change.

[misterfixall]

if burners get red on high ,and then red goes when turning down ,it maybe normal for this range, unless wattage of burners is not correct , if these are original burners ,i would doubt that

[johnbrown]

OOOkkkaaayyyy!!! How do you recognize the wattage on an existing burner? And are other wattages readily available?

[misterfixall]

the wattages should be engraved on burner. call whirlpool they should be able to tell you correct wattages with model#