|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Control Panel is Deceased |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
04-15-2008, 01:22 PM
|
|||
|
|||
Control Panel is Deceased
Model Number: KERC607HBT4 Brand: Kitchen Aid Age: 5 - 10 years
Hi,
I turned a stove-top control knob on, heard a loud 'pop', saw sparks shoot out from under the control panel. Note that the circuit breaker was NOT tripped. Now, there is no function and no display in the control panel. The stove-top elements still function fine and the red indicator lights still come on. I'm thinking it's the Microcomputer (or Control Electrical as called by some), AP3008749 made by WHIRLPOOL. However, my wife informs me that the service man said something about the problem being the 'Control Ribbon'. By-The-Way, are KitchenAid and Whirlpool the same thing now? I see parts by Whirlpool? Thanks for any help.  Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
04-16-2008, 09:35 AM
|
|||
|
|||
|
Update
The Microprocessor board shows NO signs of damage, which I think is odd considering that sparks were launched from under the front of the panel. Hmmm, still not positive that the board is the problem. Comments please.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Control Panel or Electronic Control - which causes blinking panel lights? | MarcLCH | Dishwasher Repair | 1 | 02-25-2010 03:25 AM |
| control panel | tim ward | Oven Repair (including Ranges and Cooktops) | 1 | 01-13-2010 03:22 PM |
| GE Built-In Oven Control Panel - replace entire assembly or just control kit | boschuser | Oven Repair (including Ranges and Cooktops) | 1 | 01-05-2010 03:11 AM |
| tranformer blew on control panel need specs for new transformer not control panel | kaydog2009 | Oven Repair (including Ranges and Cooktops) | 0 | 05-11-2009 07:22 AM |
| Replace control panel or just control panel housing? | Max Strano | Dishwasher Repair | 1 | 08-26-2008 06:02 PM |
Linear Mode
