Oven Repair (including Ranges and Cooktops)

onenwalsh · #1 (**permalink**) 03-31-2008, 03:28 PM

I have a General Electric gas oven JGBP35, the oven does not get up to the proper heat. I changed the Tempature sensor and it still doesn't work. The oven egnitor works the burner goes on for 10-20 seconds and then turns off, about 3-4 minutes later it goes back on for 10-20 seconds. Any ideas?

Gene · #2 (**permalink**) 04-01-2008, 04:19 PM

Most likely the problem is a bad oven control. In order to provide the right part number I need the rest of the model number.

Gene.

victor borcea · #3 (**permalink**) 04-02-2008, 05:32 AM

I have same problem but nobody want to help me and i have the exact model nr.I think the don`t know.

onenwalsh · #4 (**permalink**) 04-02-2008, 01:30 PM

Quote:

Originally Posted by Gene

Most likely the problem is a bad oven control. In order to provide the right part number I need the rest of the model number.

Gene.

Hi Gene,

Thanks for responding. The entire model number is JGBP35GEP3WG

Gene · #5 (**permalink**) 04-02-2008, 06:49 PM

Hi onenwalsh,

The part number for the control board (without overlay) is AP2632694

The overlay is no longer available. You have to be careful not to damage it when you'll remove it from the old control board. It is selfadhesive.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
electric oven	VIN	Oven Repair (including Ranges and Cooktops)	10	05-22-2008 10:05 PM
general electric dryer won't start	adrianbolso77	Dryer Repair	4	01-29-2008 07:25 PM
General Electric Profile Refrigerator	asteward64	Refrigerator & Freezer Repair	9	12-26-2007 03:08 AM
GE Electric Oven	Terry C	Oven Repair (including Ranges and Cooktops)	8	11-21-2007 09:15 AM
Whirlpool general	magician59	Dryer Repair	2	08-19-2007 05:19 PM