[AARON baseball]

Dear pro's
I POSTED A QUESTION BACK ON 12/3/09 IN REGAREDS TO A CODE THAT CAME UP ON MY OVEN # KEBS107DBL8 ... tHE CODE THAT COMES UP IS F2E1 AND YOU TOLD ME TO REPLACE THE CONTROL PANEL ...So today i received it and installed it and the same code keeps coming back F2E1 wHAT DO I DO NOW

[Gene]

Originally Posted by AARON baseball

Dear pro's
I POSTED A QUESTION BACK ON 12/3/09 IN REGAREDS TO A CODE THAT CAME UP ON MY OVEN # KEBS107DBL8 ... tHE CODE THAT COMES UP IS F2E1 AND YOU TOLD ME TO REPLACE THE CONTROL PANEL ...So today i received it and installed it and the same code keeps coming back F2E1 wHAT DO I DO NOW

I checked your threads posted on 12/3/09 & 12/2/09 and, unfortunately nobody replied to your question, so I do not know who told you to replace the control panel.

According to the Tech sheet, the "F2-E1" error code means that the control board does not sense the keypad keytail connected. The manufacturer recommended to press CANCEL pad and replace the keypad (control panel) if the error code returns after 60 seconds. Otherwise the control board has to be replaced.

Have you ran the above recommended test?

At this time looks like the control board is the culprit.

- The control board Part number: AP3135399

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL KEBS107DBL8 | AppliancePartsPros.com

I feel sorry for the money you spent. Unfortunately, this is a pretty common situation with Whirlpool ovens. The diagnostic instructions are not very clear written and sometimes both of these parts have to be replaced to solve a problem.

Gene.