|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Is bake element bad? |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
03-21-2008, 12:15 AM
|
|||
|
|||
Is bake element bad?
Model Number: sve47600b Brand: Jenn-Air Age: 5 - 10 years
My Jenn-Air oven will not bake above 300 degrees. The broil element cycles on and off but the bake element stays cold. Does that mean the element is bad, or could there be a something else that is wrong?...Is the broil element supposed to cycle on and off in the bake mode?...All help is appreciated...
    
|
|
03-21-2008, 05:40 PM
|
||||
|
||||
|
Remove the Bake heating element as far as wires go and check for burned wire(s).
If there is nothing wrong, remove one of wires from the heating element and check for 240V while the control calls for Bake. Post your findings. Here are the break down diagrams for the Jenn Air range Model SVE47600B Gene. P.S. The Broil heating element is involved in the preheating cycle.
__________________
Professional appliance repair in Los Angeles, California.
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| replacing bake element | staceymoore01 | Oven Repair (including Ranges and Cooktops) | 2 | 06-13-2008 11:25 PM |
| Bake Element Repair | mpoatsy | Oven Repair (including Ranges and Cooktops) | 1 | 01-07-2008 10:40 AM |
| no power to Bake element | Hugh | Oven Repair (including Ranges and Cooktops) | 1 | 12-29-2007 09:49 AM |
| Bake Element Installation | HelpMeHelpMe | Oven Repair (including Ranges and Cooktops) | 2 | 08-20-2007 04:00 PM |
| Bake Element and BAKE cycle not working | jeffman | Oven Repair (including Ranges and Cooktops) | 1 | 08-04-2007 11:18 PM |
Linear Mode
