|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Surface Element Control |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-17-2009, 12:38 AM
|
|||
|
|||
Surface Element Control
Model Number: CPLEF398ACA Brand: Frigidaire Age: 5 - 10 years
Two right hand Surface Element Controls donot maintain and run the desired temperature, e.g. the Electronic Surface Element Control displays the desired temperature but doesnot stay and the burners donot heatup. It only works in high mode.
Recently there was Safety Recall on this model and the repairman who came replaced all the four Control Electrial Parts(Part # 316239600) and Control Electrical (Part # 316239400), and put tapes to seal gaps and spaces between the backguard panel and inner backguard shield. The malfunction is still there. Called a few repair shops; they did not respond back. Any idea. Is it also a safety issue? Thanks Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Surface element does not heat | lonepalm | Oven Repair (including Ranges and Cooktops) | 3 | 06-21-2009 07:54 PM |
| FRIGIDAIRE Surface element | jrc140 | Oven Repair (including Ranges and Cooktops) | 1 | 05-20-2009 05:22 PM |
| Surface Element | tractor1 | Oven Repair (including Ranges and Cooktops) | 6 | 09-12-2008 02:39 PM |
| Surface Element Repair | lan68 | Oven Repair (including Ranges and Cooktops) | 4 | 02-08-2008 05:02 PM |
| replace surface element | gaitherjohn@hotmail.com | Oven Repair (including Ranges and Cooktops) | 1 | 01-31-2008 03:20 PM |
Linear Mode
