|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Dual switch to single switch substitution |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-09-2009, 05:11 PM
|
|||
|
|||
Dual switch to single switch substitution
Model Number: JB970SB1SS Brand: GE Age: 5 - 10 years
One of my dual surface radiant electric elements on my GE electric stove is not working properly. The indicator light near the control knob is always on even when the switch is in the off position. If I turn the knob to any position, the element will go to high and stay there. I have no control. I can either have full heat or no heat. The hot surface indicator light comes on when the element is hot and goes off when it cools off, so that circuit is working properly.
I think that I have a bad switch. However, the switch that I need (WB23M104) is not available anywhere (NLA - "no longer available"). I'm wondering if it would be possible to substitute a single element switch so that I could use one of the two dual elements? Do you have a wiring diagram for this stove? Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| dual infinity switch | metro don | Oven Repair (including Ranges and Cooktops) | 0 | 09-19-2009 07:25 AM |
| Installing New dual switch | ptcgarner | Oven Repair (including Ranges and Cooktops) | 1 | 09-10-2009 06:11 PM |
| Wiring for dual infinite switch | captain stan | Oven Repair (including Ranges and Cooktops) | 0 | 05-16-2009 02:37 PM |
| Help - I need to replace the GE Dual Inf Switch | pamnbee | Oven Repair (including Ranges and Cooktops) | 1 | 01-25-2009 04:22 PM |
| Dual Burner switch on the blink again | macmaxim | Oven Repair (including Ranges and Cooktops) | 4 | 07-17-2008 01:40 PM |
Linear Mode
