|Register | FAQ's | New Posts | Today's Posts | Extras|
Kitchenaid Oven Problem
Model Number: KEBS208DBS8 Brand: -brand- Age: 5 - 10 years
2 years ago right about now, the Oven stoped working, What I noticed was
Solenoid was not popping out when door is closed and oven working (not locking) which caused door open error. When I pull on it it worked for a while.
I thought it was stock due to grease build up.
Then control panel fried costing me over $400 dollars.
Last week it broke again.
So I look up on manual and did some investigation on my own.
Solenoid when, disassembled from oven unit, when inserted into cylinderical slot it is held by magnetic power.
Is the function of the Solenoid, to reverse polarity to kick out the contact
when door is closed and oven activated?
If it is, the fact that my solenoid does not work like that means I have bad
Please let me know, and thank you
Ads By Google
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|kitchenaid oven wiring problem||kfhaggerty||Oven Repair (including Ranges and Cooktops)||6||11-20-2009 12:36 PM|
|Kitchenaid Combo Wall Oven Problem||rob_s||Oven Repair (including Ranges and Cooktops)||6||10-30-2009 10:51 AM|
|Kitchenaid Part Problemfirstname.lastname@example.org||Dishwasher Repair||0||08-19-2009 02:09 PM|
|Kitchenaid Ignitor Problem||wgbiii||Oven Repair (including Ranges and Cooktops)||3||01-07-2009 09:05 PM|
|KitchenAid icemaker problem||misspost||Refrigerator & Freezer Repair||1||01-07-2009 03:23 PM|