Oven Repair (including Ranges and Cooktops)

shokwaves · #1 (**permalink**) 11-05-2009, 05:27 PM

After replacing the oven bake ignitor and sensor, oven still does not work

I just received the new ERC touchpad. Can anyone walk me through how to remove the old one and replace it with the new one?

Thanks!

shokwaves · #2 (**permalink**) 11-05-2009, 06:07 PM

I figured out how to replace the ERC, a/k/a ECU or touchpad (the part with the clock and keypad). It was tricky but do-able. However, bake feature is still not working nor does the ignitor work. The convect feature is very slow to heat. The broil function does work fine.

Before the new ERC touchpad installed, I was getting a code of F1.4. Now, that is gone, but the display says 03.0. What gives?

Any feedback or suggestions are welcome.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
replacing microwave touchpad	suzjack7	Microwave Repair	0	01-25-2010 02:36 PM
GE microwave JVM1870SF001-replacing touchpad didn't solve problem	jerrycarson	Microwave Repair	1	09-17-2009 05:59 PM
Replacing touchpad on gas oven	anjill	Oven Repair (including Ranges and Cooktops)	0	09-05-2009 11:00 AM

Walk me through replacing ERC -touchpad

Oven Repair (including Ranges and Cooktops)

After replacing the oven bake ignitor and sensor, oven still does not work I just received the new ERC touchpad.