|Register | FAQ's | New Posts | Today's Posts | Extras|
The Hot Surface Indicator Light Stays On
Model Number: jb650dt1ww Brand: GE Age: 1 - 5 years
my problem is The Hot Surface Indicator Light (on the cooksurface) Stays On forever and the cooking surface is not even warm.
i unplug the 220v cord in the back of the stove and plug back in and the light comes back on.
someone suggest me to change this item instead.
i took this light out and measure with a DMM ... its open when measured in both ways. is this normal?
but another website suggest element limiter switch may be shorted.
someone here suggested its the switch.
they told me to remove all wires from each switch and turn on stove to see if light go away.
spent 30 minutes on 5 switches and still light come on when all wires disconnect from each switch.
all burners works fine.
what do you suggest?
if the light bothers me and i take it out...is it ok?
ok since no one responded i took matter on my own
did a continuity on each burner ...
found a short on b1/b2 of commonly used burner.
remove the cable to it and leave it out for now.
today the burner stop working.
Last edited by appliancedown : 04-09-2017 at 07:00 AM.
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Hot Surface Indicator Light Stays On||erindiane||Oven Repair (including Ranges and Cooktops)||1||01-12-2016 03:26 AM|
|Hot Surface indicator light stays on||dimsum1234||Oven Repair (including Ranges and Cooktops)||0||08-27-2015 11:52 PM|
|Surface Indicator Light stays on||CaddyDaddy||Oven Repair (including Ranges and Cooktops)||1||10-20-2012 05:59 AM|
|surface indicator light stays on all the time||nolesman98||Oven Repair (including Ranges and Cooktops)||5||02-23-2012 05:33 AM|
|surface indicator light stays on||slomotion||Oven Repair (including Ranges and Cooktops)||0||05-22-2008 10:30 AM|