Oven Repair (including Ranges and Cooktops)

vanbao · #1 (**permalink**) 10-31-2009, 04:28 PM

I range is displaying the F30 error. I did some research and found out that this error might be a result of a bad themo sensor.

I would like to know how to test to see if the thermo sensor is good and where to locate this sensor on the unit.

Thank you in advance.

vanbao · #2 (**permalink**) 10-31-2009, 08:47 PM

Update,

I took my ohm meter and measured the swicth, thermal cutoff that is connected to the oven temperator sensor and there is no ohm at at. Normally, is there a way to find out if this switch should be in a closed or open position under normal circumstances.

Thank you.

denman · #3 (**permalink**) 11-01-2009, 05:38 AM

Normally thermal cutoffs should be 0 ohms at room temperature.

An exception is a fan thermostat, it closes at a certain temperature to turn the fan on

Here is your wiring diagram in case you do not have it
http://manuals.frigidaire.com/prodin.../318271934.pdf

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KitchenAid Electric Range F2 error	CathyG	Oven Repair (including Ranges and Cooktops)	12	01-10-2010 09:07 AM
F8 Error on Frigidaire Double Electric Oven	Elizabeth Varjas	Oven Repair (including Ranges and Cooktops)	0	05-25-2009 08:57 AM
Amana Electric Smooth Top Range	Lorrine	Oven Repair (including Ranges and Cooktops)	2	05-11-2009 08:18 AM
General Electric Smooth top Range "popped" and now doesn't work	Dadgumit	Oven Repair (including Ranges and Cooktops)	0	04-29-2009 05:55 PM
Frigidaire smooth top convection oven range	mac1942	Oven Repair (including Ranges and Cooktops)	1	02-02-2009 03:15 PM

Frigidaire Smooth Top Electric Range F30 Error

Oven Repair (including Ranges and Cooktops)

I range is displaying the F30 error. I did some research and found out that this error might be a