|Register | FAQ's | New Posts | Today's Posts | Extras|
Urgent Help Fix My Jenn-Air Gas Range
Model Number: JGR8875QDS Brand: Jenn-Air Age: 1 - 5 years
Can someone please provide assistance,
1 month ago after the self-cleaning feature was used, the oven failed to heat up properly, then not at all. I have since replaced the oven bake ignitor and the temp sensor (easy fixes). Oven still not working; convect feature is very slow to heat and still doesn't reach final temp. Code has been F1.4.
Is it now time to replace the famous "touch pad," a/k/a "ERC" (see photo of part)? Is it worth the expense as the range is 5 years old and part is out of warranty? I called Maytag and they recommended having their factory authorized repairman diagnose the problem for $130. If that part is bad, Maytag would send me a new one free (to the repairman of course), and I would still have to pay his fee to install.
Or, should I attempt to repair this myself after ordering the pictured part? Has anyone made this repair and is it easy? Any pitfalls, etc...? I have since learned that a company online can fix these touch pads for about $100 including shipping w/a 2yr warranty.
Feedback is appreciated FAST!
Last edited by shokwaves : 11-01-2009 at 05:00 AM.
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|jenn air gas range||shatter||Oven Repair (including Ranges and Cooktops)||0||08-16-2009 01:19 PM|
|Jenn-air Range||freebird102||Oven Repair (including Ranges and Cooktops)||1||07-29-2009 01:48 PM|
|Jenn-air range||carolr||Oven Repair (including Ranges and Cooktops)||1||04-02-2009 07:46 PM|
|jenn air range||kkillian||Oven Repair (including Ranges and Cooktops)||1||03-14-2009 10:37 AM|
|Jenn Air Range||ed wilson||Oven Repair (including Ranges and Cooktops)||1||10-02-2008 08:08 AM|