Oven Repair (including Ranges and Cooktops)

mick100 · #1 (**permalink**) 08-15-2007, 10:23 AM

upper over is ok, lower oven wont ignite, igniter works, but gas will not flow,
should i be looking at a gas valve?

Admin / APP Team · #2 (**permalink**) 08-17-2007, 09:14 AM

There is a small chance that the valve is bad, but most likely what you need to replace is the oven igniter.

- Lower oven igniter for Caloric RSS399

jomo · #3 (**permalink**) 08-26-2007, 10:46 AM

my oven will not stay on after it reaches the set temperature. I just replaced the oven igniter. What might be the problem?

Admin / APP Team · #4 (**permalink**) 08-27-2007, 10:10 AM

jomo, it would be better if you create a new topic (click on POST NEW TOPIC) and include your oven model number.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dryer wont start	phyllis	Dryer Repair	5	10-21-2008 03:24 PM
Burner won't ignite	flaumbetty	Oven Repair (including Ranges and Cooktops)	5	01-25-2008 06:39 AM
Burners and oven will not ignite	bren	Oven Repair (including Ranges and Cooktops)	2	08-09-2007 01:15 PM
Oven does not ignite	Dan Damiata	Oven Repair (including Ranges and Cooktops)	0	08-09-2007 07:36 AM
Oven wont heat to temp	rickm1959	Oven Repair (including Ranges and Cooktops)	1	07-24-2007 04:52 PM

oven wont ignite