|Register | FAQ's | New Posts | Today's Posts | Extras|
GE Oven control connectioins
Model Number: JKP18BOW1BB Brand: GE Age: 5 - 10 years
Hello. I ordered and recieved a replacment oven controller and it has additional terminals beyond the original.
The original part (# WB27K5334) has board mounted relays with only the output terminal connections showing for Conv, Bake, and Broil.
The new replacment controller (# WB27T0204) has the three board mounted
relays also, but with all relay contact points available.
Convection relay has a Com and N/O
Bake and Broil, both have a Com, N/O , & N/C
Do I need to jumper L1 to all three relay coms?
Also, I would assume that the N/O connection is used on bake and broil w/ the N/C connection left empty. Is that correct?
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|oven control||greg pezzolla||Oven Repair (including Ranges and Cooktops)||3||01-22-2010 12:22 AM|
|GE Built-In Oven Control Panel - replace entire assembly or just control kit||boschuser||Oven Repair (including Ranges and Cooktops)||1||01-05-2010 04:11 AM|
|Oven/clock Control Panel is no longer lit but oven does email@example.com||Oven Repair (including Ranges and Cooktops)||1||12-05-2009 05:07 PM|
|oven control||trask47||Oven Repair (including Ranges and Cooktops)||0||07-19-2008 10:52 AM|
|Ge Oven Control||jmajda12||Oven Repair (including Ranges and Cooktops)||1||08-15-2007 05:19 PM|