Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Emmayy2  
#1 Posted : Friday, October 4, 2013 2:09:08 PM(UTC)
Quote
Emmayy2

Rank: Member

Groups: Registered
Joined: 10/4/2013(UTC)
Posts: 2

I have the same problem with our whirlpool double oven. While in the middle of baking bread the control panel went blank and the oven no longer functional. I left the oven alone and in 15-30 minutes the digital clock reappears with the Code E6 F2. When I push turned off the code disappears. When I tried to turn the oven on again it worked and then the screen went blank again after a few
minutes working & then the oven didn't heat and the screen went blank again. s it the control panel? Please help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Emmayy2  
#2 Posted : Friday, October 4, 2013 2:13:36 PM(UTC)
Quote
Emmayy2

Rank: Member

Groups: Registered
Joined: 10/4/2013(UTC)
Posts: 2

Originally Posted by: Emmayy2 Go to Quoted Post
I have the same problem with our whirlpool double oven. While in the middle of baking bread the control panel went blank and the oven no longer functional. I left the oven alone and in 15-30 minutes the digital clock reappears with the Code E6 F2. When I push turned off the code disappears. When I tried to turn the oven on again it worked and then the screen went blank again after a few
minutes working & then the oven didn't heat and the screen went blank again. s it the control panel? Please help.

I repeated this the next day and it did the same thing.
denman  
#3 Posted : Saturday, October 5, 2013 3:26:45 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool RBD305PDQ14 Wall Oven - AppliancePartsPros.com

See the attachment for the tech sheet

This is difficult to trouble shoot as the error is related to the control panel keypad. Also it may be related to the unit heating up and causing a bad connection.

I would try the following first as it may just be a bad connection.
If that does nothing I would replace the control board.
This is a gamble but it is the most likely cause.

Connector Cleaning / Checking
Unplug the unit
Open it up
Remove the ribbon cable from the keypad to the control board at the control board.
Clean the edge connector. Use electronics contact cleaner or isopropyl alcohol.
If it is the type where there is not a connector just the insulation is removed, it can be cleaned with a pencil eraser. Do not use an ink eraser as it is too abrasive.
Check the tracks in the ribbon cable for hairline cracks. A magnifying glass helps here.
Would not hurt to clean the connector on the board. Use electronics contact cleaner or isopropyl alcohol and a tooth brush. Be gentle and do not reconnect till all the solvent evaporates.
Reconnect everything and give it a try.
File Attachment(s):
RBD305.pdf (505kb) downloaded 3 time(s).
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.