|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » GE Oven Broken Bake Element |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-21-2013, 08:40 AM
|
|||
|
|||
GE Oven Broken Bake Element
Model Number: J HP70N OK2 Brand: GE Age: More than 10 years
Needed to update thread. The bake element cracked in my GE oven. I replaced the element but it still will not heat up. I checked the wires in the back of the element that lead to the thermostat and the oven switch. They seem fine. The broiler works fine, as well. Should I replace the oven control switch? In my oven, it is a discontinued part, but I was able to find a replacement on line. Thanks, J Grabowski Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| broken wire at bake element connection | matkins68 | Oven Repair (including Ranges and Cooktops) | 1 | 02-23-2011 10:48 AM |
| Oven Bake Element Broken! | TracyS | Oven Repair (including Ranges and Cooktops) | 1 | 10-25-2010 04:13 AM |
| Broken Bake Element!! | alpha_mare | Oven Repair (including Ranges and Cooktops) | 2 | 07-15-2010 10:33 PM |
| Oven bake/broil not working after bake element replacement | J Justin | Oven Repair (including Ranges and Cooktops) | 1 | 11-05-2009 05:36 PM |
| broken bake element | essies | Oven Repair (including Ranges and Cooktops) | 0 | 10-27-2009 08:54 AM |
Linear Mode
