|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » I replaced an igniter now nothing on the stove top works |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: CGR1420BDW Brand: Magic Chef Age: More than 10 years
I replaced one igniter on the stove top because it wasn't giving a good spark. All the other burners were working fine and the one I replaced would light on its own once in a while. I put a new igniter on the front left burner and it did work at first. Now none of the burners click when try to light them, so now it seems like an electrical problem. When one knob is turned to light all four burners spark when the stove did work properly.
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
||||
|
Hi.
Check the burner switches for a short, then check the wire harness between the switches and spark module.If everything checks out OK - replace the spark module most likely located behind the drawer on the right side. Part number: 8215557 Here are the breakdown diagrams and Gas Controls parts for Magic Chef CGR1420BDW - AppliancePartsPros.com Post the results. Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here. |
|
||||
|
You are welcome.
Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gas won't ignite, igniter replaced, coils replaced | JTPaul | Dryer Repair | 3 | 12-03-2012 10:31 AM |
| oven does not heat but stove works control panel works | asfimag | Oven Repair (including Ranges and Cooktops) | 1 | 11-11-2012 02:57 AM |
| Just replaced failed igniter switch on Stove, now igniter on before gas flowing | Isotonic | Oven Repair (including Ranges and Cooktops) | 0 | 03-19-2011 11:14 AM |
| Oven and broiler do not light, stove works, already replaced ignitor. Grrrr! | ncduckman | Oven Repair (including Ranges and Cooktops) | 1 | 02-24-2009 08:11 PM |