Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Buttons not working
Options
Go to last post Go to first unread
Model: FEF365BGWB Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
modest  
#1 Posted : Tuesday, September 29, 2009 5:43:11 PM(UTC)
Quote
modest

Rank: Member

Groups: Registered
Joined: 9/29/2009(UTC)
Posts: 4
Hi!
Guys i have a frigidaire of which there was a beeping sound last Friday showing F1, than went away.
Now the oven; Bake,Vari Broil and Clean buttons are not working, meaning i can't bake anything as of now, any help.
Thanks in advance
Modest.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Wednesday, September 30, 2009 4:50:53 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for FRIGIDAIRE FEF365BGWB | AppliancePartsPros.com

Here is a service manual
http://frigidaireservicetips.co...estandingRanges_revA.pdf

I believe you have a ES300 cotrol Page 38.

Try unplugging the unit for half an hour or so to see if it will reset.
Unit does not seem to have any built in diagnostics and the F1 code is for a control board fault.
THIS FORUM IS DEAD!!!!!!!
Back to top
rianocerous  
#3 Posted : Thursday, July 8, 2010 8:01:40 AM(UTC)
Quote
rianocerous

Rank: Member

Groups: Registered
Joined: 7/8/2010(UTC)
Posts: 4
Originally Posted by: denman Go to Quoted Post
Here are your parts
Replacement parts for FRIGIDAIRE FEF365BGWB | AppliancePartsPros.com

Here is a service manual
http://frigidaireservicetips.co...estandingRanges_revA.pdf

I believe you have a ES300 cotrol Page 38.

Try unplugging the unit for half an hour or so to see if it will reset.
Unit does not seem to have any built in diagnostics and the F1 code is for a control board fault.

Hello Denman, I hope you can help! I have a frigidaire es300, and the oven stopped working, so I ordered and installed

Clock/timer

Part Number: AP3561834
Made by FRIGIDAIRE
Part Details - FRIGIDAIRE Clock/timer, part number: AP3561834

Unfortunately, the buttons aren't working right. They are performing different functions. I looked at the repair manual PDF you have, and it's functioning just like the ES200 panel.

Did I order the wrong one? (I hope not, my wife will kill me!)

Thanks
Back to top
denman  
#4 Posted : Thursday, July 8, 2010 9:32:12 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
rianocerous


Did I order the wrong one?
Cannot say, I do not work for AppliancePartsPros and the model number you gave (ES300) does not come up.
All I can suggest is that you go to the Frigidaire site and check the clock/timer number there. You can then come back to the AppliancePartsPros site and use it to cross reference and see if your model comes up.
THIS FORUM IS DEAD!!!!!!!
Back to top
rianocerous  
#5 Posted : Thursday, July 8, 2010 10:13:16 AM(UTC)
Quote
rianocerous

Rank: Member

Groups: Registered
Joined: 7/8/2010(UTC)
Posts: 4
Thanks For your reply. If you could - I have another question.

I think I found the right clock timer - the one you mentioned (turns out my model # is in fact FEFL67DCE).

I plan on ordering it, unless...What's happening is that when we click bake, we hear the relay click, but the element nevr heats up. I assume it's more likely the timer than the element, but could I be wrong? Which is more likely to go out?
Back to top
rianocerous  
#6 Posted : Thursday, July 8, 2010 10:16:32 AM(UTC)
Quote
rianocerous

Rank: Member

Groups: Registered
Joined: 7/8/2010(UTC)
Posts: 4
correction - i finally found the right part - Part Number: AP4501684 , but the same question still applies. Based on the symptoms (the clock shows the oven on at 350, and trying to preheat, but there is NO HEAT. The broiler however does work) does that sound more like this part, or the element itself?

Thanks so much
Back to top
denman  
#7 Posted : Thursday, July 8, 2010 3:49:47 PM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
rianocerous

Here are your parts, includes a wiring diagram
Wiring diagram replacement parts for FRIGIDAIRE FEFL67DCE Frigidaire/range | AppliancePartsPros.com

Based on the symptoms (the clock shows the oven on at 350, and trying to preheat, but there is NO HEAT. The broiler however does work) does that sound more like this part, or the element itself.
I am assuming that you can change the oven set temperature and it is not locked at 350.

I would check the bake element first, just because it is easier to do.

Unplug the unit.
Remove the screw/screws holding the element to the back of the unit.
Gently pull it forward.
Undo the wire on one side of it.
It is a good idea to clip something to the wire so it does not disappear into the back of the unit.
Measure it with a meter should be 20 ohms approximately.

Here is a manual which may be helpful
http://frigidaireservicetips.com/pdfs/477_5.pdf

It is not the greatest as it does cover many units so you have to be careful to be sure you are looking at info for your unit.
THIS FORUM IS DEAD!!!!!!!
Back to top
rianocerous  
#8 Posted : Thursday, July 8, 2010 4:13:19 PM(UTC)
Quote
rianocerous

Rank: Member

Groups: Registered
Joined: 7/8/2010(UTC)
Posts: 4
Thanks so much, I'll do a resistance text tomorrow and check
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
start button/delay buttons not working (Dishwasher Repair)
by Paul42 7/18/2014 9:10:54 PM(UTC)
Whirlpool touch pad all buttons not working (Dishwasher Repair)
by icoleman 2/1/2014 6:46:29 AM(UTC)
Control panel buttons not working, have power (Dishwasher Repair)
by HWaage 8/2/2013 6:16:51 PM(UTC)
Oven Buttons not working and igniter problem (Oven Repair (including Ranges and Cooktops))
by Paul Briant 4/14/2013 11:31:39 AM(UTC)
Outside buttons not working (Dishwasher Repair)
by bwholmes 11/6/2012 7:00:44 PM(UTC)
Control buttons not working (Dishwasher Repair)
by bsmitty 7/30/2012 2:49:55 PM(UTC)
uWave DIsplay/Buttons not working (Microwave Repair)
by bjohnb 4/4/2012 6:34:38 PM(UTC)
Frigidaire Dishwasher Buttons Not Working Correctly (Dishwasher Repair)
by joeduro 11/20/2011 8:34:25 AM(UTC)
DW: Buttons not working (Dishwasher Repair)
by GPG1 4/28/2011 7:34:19 AM(UTC)
Kitchen Aid dishwasher buttons not working - which part to replace? (Dishwasher Repair)
by eggknee 1/29/2011 8:28:40 AM(UTC)
Quiet Partner - Buttons not Working (Dishwasher Repair)
by DerekS 10/18/2010 10:01:49 AM(UTC)
Kenmore Dishwasher display and certain buttons not working (Dishwasher Repair)
by jznomoney 4/21/2010 10:50:40 AM(UTC)
Kenmore buttons not working correctly (Dishwasher Repair)
by gadget228 1/31/2010 1:12:37 PM(UTC)
certain keypad buttons not working, Attn: Denman and Gene (Dishwasher Repair)
by i014 11/16/2009 8:11:43 PM(UTC)
Buttons not working (Oven Repair (including Ranges and Cooktops))
by modest 9/29/2009 5:36:17 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET