|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Replaced Igniter doesn't get hot |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-28-2012, 04:35 PM
|
|||
|
|||
Replaced Igniter doesn't get hot
Model Number: RGB790SEHASA Brand: Hotpoint Age: 5 - 10 years
The gas oven would not light, broiler and range work fine. The igniter was in pieces so I figured that had to be it and replaced it. The igniter still does not glow. I checked for continuity in the new igniter and got 0 ohms, so the igniter is probably fine. There is a 3 wire electrical connection to the igniter/gas valve assembly that I checked for power and when I set the oven to come on, there is 120 volts to the connector. So, what else could it be? Thermistat? Gas valve? and how do I check?
Thanks Matt Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gas won't ignite, igniter replaced, coils replaced | JTPaul | Dryer Repair | 3 | 12-03-2012 10:31 AM |
| Replaced igniter still not working | santacruzrob | Oven Repair (including Ranges and Cooktops) | 0 | 05-31-2012 05:17 PM |
| Just replaced failed igniter switch on Stove, now igniter on before gas flowing | Isotonic | Oven Repair (including Ranges and Cooktops) | 0 | 03-19-2011 11:14 AM |
| Replaced Igniter | daytona245 | Oven Repair (including Ranges and Cooktops) | 5 | 02-11-2010 07:46 PM |
Linear Mode
