[lifeisgood]

My oven first displayed an error code (can't remember the code) and I held down the clock icon to reset and that worked for a couple of months. Then while baking the oven automatically went into "self-cleaning" mode. Again, I pressed the clock icon to reset and that worked. The oven continued to work for about 1 month. Again, while baking the oven just shut off and the touch pad is blank. If I hit any of the icon's they beep but nothing happens. The light inside of the oven works but nothing else. We checked the fuses and they are all fine. Turned off the breaker for 5 minutes and when we turned it back on the oven beeped. What do you think the problem is?

[Gene]

The model number you posted is incorrect. Verify and repost it please.

Gene.

[lifeisgood]

Originally Posted by Gene

The model number you posted is incorrect. Verify and repost it please.

Gene.

I rechecked the model #. The model number is GBD307PDS09

[Gene]

Check the control panel thermal fuse which is wired into the hot line to the control board (the black wire connected to the P24-3 terminal) for continuity.

If the fuse is fine check for 120 VAC between the terminals P16-5 & P16-7 at the control board. If the reading is incorrect, replace the control board.

If the voltage reading is correct check for continuity between the red wires and between the blue wires at the low voltage transformer. If there is no continuity at any of these pair, replace the low voltage transformer.

- The control panel thermal fuse Part number: 4451042

- The control board Part number: W10406070

- The low voltage transformer Part number: 9760587

Here are the breakdown diagrams and Parts for Whirlpool GBD307PDS09 Wall Oven - AppliancePartsPros.com

Gene.