[StanF]

Dishwasher is recieving power but the Control panel went blank ,does not start no indicators light. Also it seems the dishwasher has some water in the tub from last run. I would appreciate any help. Thank you.

[denman]

Your model number seems to be missing some digits at the end of it.

Most of the units have a thermal fuse on the control board that may have blown.
Also it is not uncommon for problems with the wire ni=uts that attach the unit to the house wiring.

FYI: you are in the wrong section of the forum. This is Oven Repair and you should have posted in the Dishwasher section.

[StanF]

I am sorry I didn't realize I posted in wrong forum, can/should we move it to correct forum? After opening control panel It seems there is no Thermal fuse in this washer. I will recheck the wiring.

[denman]

Might as well stay in this section.

Here are your parts
Parts for Whirlpool GU2300XTVQ2 Dishwasher - AppliancePartsPros.com

See the attachment for the tech sheet.
PS: It also shows a fuse
For some reason the site will not let me upload the tech sheet now. I will try again later today

Take a look at item 6 in the Control Panel Parts section.
It does show a fuse, click on it's picture for more info on it.

[denman]

AppliancePartsPros still will not me upload the tech sheet.
Perhaps it is too large.

So I have put it on a 3rd party site, see below
Download GU2300.pdf

[StanF]

Originally Posted by denman

AppliancePartsPros still will not me upload the tech sheet.
Perhaps it is too large.

So I have put it on a 3rd party site, see below
Download GU2300.pdf

Mr. Denman I really appreciate your help, I am not a technician, when I opened the control panel I didn't see anything that looked like a thermal cutoff switch. This model doesn't seem very common, there isn't much on the internet when I do a search. I will look at the Pdf sheets you offered me. Again, Thank you for your help!

[StanF]

Mr. Denman I really appreciate your help, I am not a technician, when I opened the control panel I didn't see anything that looked like a thermal cutoff switch. This model doesn't seem very common, there isn't much on the internet when I do a search. I will look at the Pdf sheets you offered me. Also, I will check to see what parts I will need from your link. Again, Thank you for your help!