Oven Repair (including Ranges and Cooktops)

drudy1964 · #1 (**permalink**) 11-13-2012, 04:25 AM

I have ran the self cleaning cycle and now my oven will not heat.
I have 15 poeple coming this Friday for a Thanksgiving dinner... HELP

Donna

denman · #2 (**permalink**) 11-13-2012, 06:26 AM

Here are your parts
Parts for Whirlpool GY396LXPS03 Range - AppliancePartsPros.com
See the attachment for a wiring diagram. The closest I could find to a S03 was a S02 but it should be close if not the exact same.

I am assuming that the stove top elements work OK.

You probably blew the thermal overload.
I think it is item 23 in the Oven Parts section.
But may be the thermal cut-out, item 15 in Cooktop Parts section.
It will be the one in the wiring to the oven elements.
Note: If you click on the part's picture a new page will open with more info about it.

Remove power from the unit and check the device with a metyer, should be 0 ohms.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven won't heat up after self cleaning cycle	ToughTags	Oven Repair (including Ranges and Cooktops)	1	02-28-2012 05:35 PM
Oven won't work after the self cleaning cycle	sluggermike	Oven Repair (including Ranges and Cooktops)	5	11-29-2011 12:58 AM
Won't Heat after Self-Cleaning Cycle	JolieBlonde	Oven Repair (including Ranges and Cooktops)	1	06-09-2010 06:06 AM
Oven does not heat after using Cleaning Cycle	DoubtingThomas	Oven Repair (including Ranges and Cooktops)	3	12-07-2009 07:16 AM
Built-inWhirlpool single oven won't heat after cleaning cycle	Gail	Oven Repair (including Ranges and Cooktops)	1	11-01-2008 12:27 AM

OVen will not heat after self cleaning cycle

Oven Repair (including Ranges and Cooktops)

I have ran the self cleaning cycle and now my oven will not heat. I have 15 poeple coming this