|Register | FAQ's | New Posts | Today's Posts | Extras|
Jenn air stove problem
Model Number: JES9800AAB Brand: Jenn-Air Age: 1 - 5 years
I'm a complete novice at appliance repair but I do have a bit of electronic experience so I really need some advice.
I had a short in the main power line to the house which resulted in 240v being put on all the appliances. The stove is completely dead.
I've had a poke around inside with a voltage detector and I have 115v all the way to the control board.
I've seen one on a site for $261.
My questions are:
1. Is it likely that the control board is actually blown?
2. Is $261 a good price?
3. Is there anything else I should check before jumping in and ordering a new board?
Any advice would be greatly appreciated.
Thanks in advance
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Jenn Air Stove/range||ester||Oven Repair (including Ranges and Cooktops)||0||09-20-2012 07:18 PM|
|Jenn Air gas stove not igniting||mrslori||Oven Repair (including Ranges and Cooktops)||0||11-16-2010 05:58 AM|
|jenn air stove||Tomlights||Oven Repair (including Ranges and Cooktops)||0||03-29-2010 06:09 AM|
|old Jenn-air stove/oven||fokka1||Oven Repair (including Ranges and Cooktops)||1||08-24-2009 11:49 AM|
|jenn air stove||jsgt||Oven Repair (including Ranges and Cooktops)||0||10-28-2007 04:12 PM|