Oven Repair (including Ranges and Cooktops)

Mgfny · #1 (**permalink**) 11-11-2012, 11:14 AM

Hello: I replaced surface igniter because it was arcing inside the porcelan insulator (visible looking in above). The new electrode part #8523793 is arcing underneath from the connector terminal to the collar on the igniter. This can be seen from the front with the knob cover removed. How do I prevent this? Anyone got any ideas on this on? Thnks in advance,----Mgfny

Mgfny · #2 (**permalink**) 11-16-2012, 12:58 PM

From Mgfny: I experimented by using JB-Weld as an insulator. I carefully applied a generous amount all around the connector end, but not on the connector itself. I applied it all the way up to the underside of the igniter collar. It worked perfect! No more arcing and burners ignite instantly!
I used the slow-dry JB-Weld and not the quick-dry. Long term I'm not sure if JB can take heat. The specs say it will withstand 600F.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whirlpool surface element not working	sloan	Oven Repair (including Ranges and Cooktops)	0	09-19-2011 09:13 AM
Whirlpool Cooktop Smoothe Surface	cmjordan20	Oven Repair (including Ranges and Cooktops)	0	10-20-2010 03:07 PM
Surface burner spark electrode	JLegendre	Oven Repair (including Ranges and Cooktops)	0	11-21-2009 08:52 AM
Whirlpool Ceramic hot surface light always on	sturdy17	Oven Repair (including Ranges and Cooktops)	1	08-11-2009 01:53 PM
Whirlpool Oven Spark Electrode Install	mattsegawa	Oven Repair (including Ranges and Cooktops)	2	11-19-2007 12:45 PM

Whirlpool surface electrode arcing

Oven Repair (including Ranges and Cooktops)

Hello: I replaced surface igniter because it was arcing inside the porcelan insulator (visible looking in above). The new electrode