|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » igniter ohm reading 1100 ohms,is it good? |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-03-2012, 04:59 PM
|
|||
|
|||
igniter ohm reading 1100 ohms,is it good?
Model Number: FGB24L2ASA Brand: Electrolux Age: More than 10 years
On a model FGB24L2ASA if the igniter is removed from the gas oven and metered, it reads 1100 ohms. Is it good?
Original problem was oven will not light and it was suggested that the igniter is weak. Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GE refrigerator Compressor ohms reading | bunty | Refrigerator & Freezer Repair | 2 | 08-26-2012 06:41 AM |
| what current reading should i get on my igniter | Billdolbow | Oven Repair (including Ranges and Cooktops) | 1 | 02-09-2011 02:57 PM |
| Coil iceing up, evaparator ohms out good fan working | Greg jackson | Refrigerator & Freezer Repair | 1 | 10-26-2009 04:43 AM |
| Temp sensor read good Ohms, oven won't heat properly | jaminels | Oven Repair (including Ranges and Cooktops) | 0 | 04-05-2009 09:15 AM |
| No heat. Thermostat reads 3.5 ohms. Good or bad? | gatorsfan | Dryer Repair | 6 | 11-04-2008 02:37 PM |
Linear Mode
