Oven Repair (including Ranges and Cooktops)

4buyers · #1 (**permalink**) 10-30-2012, 09:22 PM

Hello, I just converted the stove from natural gas to Propane, Installed the replacement orifices and turned the Manifold Piece from Nat Gas to LP. the stove appears to works ok, but when I start the oven the flame is so High it comes through the bottom of the stove and Is Extremely High, and Yello Blue, Is there something I am missing? Is there an orifice for the oven as well?

Thanks in Advance.

Simon / APP Team · #2 (**permalink**) 10-31-2012, 04:05 PM

Hi.

There is an adjustable orifice for the oven. Remove the burner and turn the orifice CW 2 turns (approximately).

Post the results.

Simon.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven flame too high	tomchef	Oven Repair (including Ranges and Cooktops)	2	08-19-2010 05:20 PM
Oven Flame Is Yellow And High. Flame Doesn't Regulate	COOLJADE	Oven Repair (including Ranges and Cooktops)	0	02-25-2010 03:28 PM
oven flame way too high	krisjo	Oven Repair (including Ranges and Cooktops)	2	06-22-2009 02:56 PM
High Flame	mario 61	Dryer Repair	3	09-09-2008 01:59 AM
High flame in oven	cstric1	Oven Repair (including Ranges and Cooktops)	1	12-06-2007 05:13 PM

Whirlpool Oven Flame too High

Oven Repair (including Ranges and Cooktops)

Hello, I just converted the stove from natural gas to Propane, Installed the replacement orifices and turned the Manifold Piece