Oven Repair (including Ranges and Cooktops)

David19 · #1 (**permalink**) 09-24-2012, 06:50 PM

My oven doesn't work even though i changed my control board. which was repaired and put back but it still doesn't heat up.

denman · #2 (**permalink**) 09-25-2012, 05:49 AM

Here are your parts, includes a wiring diagram.

Replacement parts for FEB756CBT-D models | AppliancePartsPros.com

You will see on the wiring diagram there is a thermal breaker in the element circuit perhaps this is popped.
I believe it is Item 141 in Section 1.
Remove power from the unit and one side of the breaker and measure it with a meter, should be 0 ohms.
The wiring diagram shows a breaker but looking at the part picture it shows a thermostat.
If it is a breaker it will have a button on the back/connector side that has popped out.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
oven got wet and bake doesn't work (broiler does work)	marjoriesmith	Oven Repair (including Ranges and Cooktops)	0	09-12-2011 06:46 AM
GE Profile gas oven doesnt work broiler and top work fine	repondtomehere	Oven Repair (including Ranges and Cooktops)	3	05-01-2011 11:45 AM
Surface Burners work OK, Oven dead, no control light turns on for oven	Whirlyone	Oven Repair (including Ranges and Cooktops)	0	06-07-2010 07:24 AM
oven bake or broil does not work but all top burners do work	carbatt	Oven Repair (including Ranges and Cooktops)	4	05-25-2010 09:08 AM
oven ignitor not clicking, but pilot will light manually and then the oven will work	rosscol	Oven Repair (including Ranges and Cooktops)	0	09-10-2008 05:37 PM