[ian33]

Hey everyone I am in desperate need of some incite. My Broiler is not functioning at all on my range. No fault codes appear. I bought a new broiler element and that has not fixed the issue. Any help would be greatly appreciated!! The model is RF263LXTT1

cheers
Ian

[denman]

Here are your parts
Replacement parts for Whirlpool RF263LXTT1 30" ELECTRIC FREESTANDING SELF CLEAN RANGE | AppliancePartsPros.com

The thermal fuse (Item 17 in Section 1) may have blown. It kills power to the broil element.

Un[plug the unit and one wire from the fuse and check it with a meter. Should be 0 ohms.

[ian33]

Thanks i shall check that tonight! Are there any other possibilites?

[denman]

Yes could be a bad connection/burned wire or a blown control board.

[ian33]

Ok i checked the fuse and am coming up with 0 ohm

[denman]

If the wiring to the broil element checks out OK then I would replace the control board.

[ian33]

Alright so just for my sanity i ordered and installed a new fuse still nothing. Should i pay someone to come out or just order a new control board hoping that works

[denman]

Do what you feel comfortable with.

Personally I would just get the board but you have to go with your gut.

If you order the board from AppliancePartsPros you can return it if it does not fix the problem. See their return policy.

[ian33]

Yeah i order the panel this afternoon. Thanks for your help. Local company would have wanted $150 flat rate than a board was over $400