[tonkraft]

after my jenn- air electric oven is on for awhile it starts clicking and then shuts off. i turn the breaker off and back on and this resets it. it seems like it happens after it is on for awhile andlet it cool off and it is ok

[Simon / APP Team]

Hello.

Most likely the problem is bad relay in the control board. After awhile contacts inside the bake relay overheats and that cause clicking and shutting off.
Jenn-Air doesn't sell just the relay. You will have to buy the control board. It's easy to replace.

The control board Part number: AP4088560

Here the breakdown diagram and Replacement parts for Jenn-Air SVE47500B RANGE- S/C S/I DDRAFT ELE | AppliancePartsPros.com

Please post the results.

[tonkraft]

thanks for the help. that was my first thought because this happened about 5 years ago. a new controll board fixed it. i bought a new board this time and still have the same problem. any other ideas?

[Simon / APP Team]

Hi.

Try to locate where is this sound come from and get back to me, please.

[graybeard4953]

I am experienceing the same problem and have replace thhe control pannel for the second time.

any help would be appreciated

[Simon / APP Team]

Hello.

Ops. My fault. The problem is the relay board not the display board. It's part#29 at the diagram#3.

The relay board Part number: AP4010045

Her are the breakdown diagrams and Replacement parts for Jenn-Air SVE47500B RANGE- S/C S/I DDRAFT ELE | AppliancePartsPros.com

Please return the display board. There should be no problem returning it.

Thank you. Post the results.

[graybeard4953]

I do not find that part on my model stove

[Simon / APP Team]

Hello.

Ops. My fault. The problem is the relay board not the display board. It's part#29 at the diagram#3.

The relay board Part number: AP4010045



Her are the breakdown diagrams and Replacement parts for Jenn-Air SVE47500B RANGE- S/C S/I DDRAFT ELE | AppliancePartsPros.com

Please return the display board. There should be no problem returning it.

Thank you. Post the results

Read more: oven clicks, shuts off
http://forum.appliancepartspros.com

[Simon / APP Team]

Hello.

According to the diagram your range is identical to the previous one.If you will look at diagram #3 it's listed as#29.

You can locate the relay board by tracing wires from the elements.

Post the results.

[tonkraft]

thanks for the help guys,i will come here first next time. i went and bought a new stove, got tired of messing with a 15 year old one. the place i bought the control board from will not take it back . i also had to buy a new touch pad, the ribbon cable broke when i replaced the control board. anyone know where i can sell them? thanks