[zenzoz]

I have started to get an F1 code on my Gemini stove. It only comes on sometimes and ususally after an hour. I reset and sometimes it works for a bit and sometimes it comes on after a minute and the I reset.
It's strange because I cleaned but upper and lower oven and worked fine.
I also have one of the stove hot lights on and won't come off when cools down.
After a few weeks I saw an F3, I believe, but never did see it again.
Should I replace the sensor or the Control board? I did check the sensor at the wall at the oven and was around 1100 ohms. I did not chek it at the control board to see if it was the wiring.
Thanks