Oven Repair (including Ranges and Cooktops)

JAUGUSTINE · #1 (**permalink**) 07-06-2009, 09:35 AM

After selcting BAKE or BROIL when you press the START button it won't start. Which part need to be replaced?

Dan O. · #2 (**permalink**) 07-06-2009, 02:42 PM

Quote:

when you press the START button it won't start.

That could just be caused by a defective button on the control keypad requiring the whole control panel (see the link below) to be replaced but could also just be a poor connection in the ribbon connector between it and the electronic control.

LINK > GE JKP15CD1 Control Panel, Bisque (no picture)
LINK > GE JKP15CD1 Control Panel, White
LINK > GE JKP15CD1 Control Panel, Black
LINK > GE JKP15CD1 Control Panel, Almond

There is a slim chance the problem might be in the electronic control itself but I think it fairly unlikely for your symptoms.

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Start Button won't work on Control Panel - F1 error	lesjj	Oven Repair (including Ranges and Cooktops)	0	01-27-2010 01:18 PM
All button on control panel do not work	laongoandong	Oven Repair (including Ranges and Cooktops)	1	09-15-2009 01:04 PM
Start Button Wont Work On Duet Washer	mmcghee	Washer Repair	1	08-29-2009 04:39 AM
Oven Start Button doesn't Work	TexasGirl-rs	Oven Repair (including Ranges and Cooktops)	0	10-31-2008 01:25 PM
control panel temp up button does not work	chuck alongi	Oven Repair (including Ranges and Cooktops)	1	09-08-2008 03:41 PM

GE Oven Start button on Control Panel wont work

Oven Repair (including Ranges and Cooktops)

After selcting BAKE or BROIL when you press the START button it won't start. Which part need to be replaced?