Thermador Burner Not Coming On and Oven Not Heating
 

The control knob for the left-front burner does not activate the burner on the stove - no ignition clicking, no gas coming out. Solenoid?

Also, oven only heating to about 150 degrees, flame (and gas) coming out continuously but at very low level. Orifice/Regular/Thermostat?

Please help on how to repair each, preferably with actual part numbers. Thanks!

If it's less than a year old then do not do anything and call Thermador for the warranty service.

Gene.

Thermador Older Than 1 Year
 

Thanks. Ooops...input error on the drop-down...my Thermador over is actually around 10 years old.

The problem with the LF burner most likely is a bad potentiometer. Thermador has redesigned this part and sell it know as a kit included the simmer controller.

In order to find out what is wrong with the oven you have to measure the current drawn by the oven igniter wile it's "on".

- The part number for the simmer control kit is AP3672574

Here are the breakdown diagrams and Replacement parts for THERMADOR PRSG304 | AppliancePartsPros.com

Gene.