|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Front stainless panel removal Thermador GPS366S |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: GPS366S Brand: Thermador Age: 5 - 10 years
Can anyone tell me how to remove the front stainless steel trim panel on a Thermador GPS366S? This is the piece behind the knobs and chrome bezels that must be removed to service the control potentiometers.
It appears to be glued to the edges of the front bullnose piece. Before I pry too much I would like to make sure that is how it is really attached. thanks Dave Christensen Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
I know this is late, but for all of you DIY folks... Remove the two bottom screws then pull slightly on each side, while cutting the double-sided tape holding the front panel on. Once the tape is cut, the panel will release. The panel is released from the top clip when you pull the bottom toward you.
|
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Front Panel Removal | Edward Wieczorek | Dishwasher Repair | 1 | 07-31-2011 02:44 AM |
| Removal of front panel | razjcz | Dishwasher Repair | 0 | 02-04-2010 01:49 PM |
| Front panel removal | IanL | Dryer Repair | 0 | 12-01-2009 03:58 PM |
| front panel removal | DREW255 | Washer Repair | 5 | 10-01-2008 08:06 PM |
| Removal of the top of the front panel | walt sines | Dishwasher Repair | 1 | 02-29-2008 12:52 PM |