[marimer]

Frigidaire Gallery Stove. The oven is controlled by a digital panel. The digital panel is off, therefore can't use oven. Is there a fuse that can be changed or do I need to replace the digital display?

[Dan O.]

Frigidaire Gallery Stove.

I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number. If you post it we can look it up to see what appliance design you're dealing with.

You can find tips for locating the model and serial number identification tag on your appliances at the following link:

LINK > Model Number Tag Location Guide

Is there a fuse that can be changed

It is impossible to say what components your appliance consists of until we know which exact appliance you have. That identification is done using the appliance's complete model number.

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~

[marimer]

Found it! The model number is: FEF377CFSD
Thanks!!

[Dan O.]

The digital panel is off

I don't see any components in the range that could cause that besides a failed control or maybe loose/broken wiring leading to it.

LINK > Frigidaire FEF377CFSD Electronic Control

Someone might need to confirm if power was getting to the control. If it WAS getting power but NOT working, it should be a sure sign that the control was defective and needed to be replaced.

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~

[marimer]

Thanks for the information.