Oven Repair (including Ranges and Cooktops)

kjnowicki · #1 (**permalink**) 12-10-2007, 03:34 PM

Hello I have a Oven Problem I need to get some Info on I'm thinking the Glow plug for the oven went out.When turning on the oven i hear the clicking at the control nob to start the heating of the glow plug but nothing happens and i don't see any light from the plug when i turn on the broiler it starts to glow the a click from the gas to ignite.So my question is does this sound like a glow plug gone bad? any advice would be great

Gene · #2 (**permalink**) 12-10-2007, 07:46 PM

Check for 120V coming to the igniter (#28 on the #3 break down diagram)when the control calls for the heat.

If there is 120V then replace the oven igniter.

If there is no 120V then replace the control board.

- The part number for the oven igniter AP2014008

- The part number for the control board AP3187700

- Here are the break down diagrams for the GE range Model JGBP28BEA6WH

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE XL44 Range	JimG	Oven Repair (including Ranges and Cooktops)	14	10-28-2008 05:39 PM
Thanksgiving Oven Problem.....its still a Problem!	rbmattila	Oven Repair (including Ranges and Cooktops)	1	03-03-2008 10:05 AM
Oven Problem	awanabug	Oven Repair (including Ranges and Cooktops)	13	01-09-2008 12:37 PM
GE XL44 stove top ignition problem	RonE	Oven Repair (including Ranges and Cooktops)	1	09-10-2007 10:20 AM
GE XL44 nothing in oven works at all.	tractorhead	Oven Repair (including Ranges and Cooktops)	0	07-25-2007 05:37 PM

XL44 Oven Problem

Oven Repair (including Ranges and Cooktops)

Hello I have a Oven Problem I need to get some Info on I'm thinking the Glow plug for