Oven Repair (including Ranges and Cooktops)

CroisanMountain · #1 (**permalink**) 12-08-2007, 11:26 AM

On Thanksgiving morning the radiant top and oven were working. At the end of Breakfast they quit. The clock, oven settng temp, etc. display still works. I reset the circuit breaker. When I turn on the element, it immediately clicks and the light on the panel flashes. The oven shows all signs of working except that it doesn't heat anything either.
I had the control panel replaced 4 years ago with the improved Sanyo model.
UPDATE===============
It turns out the circuit breaker itself failed. It was a Murray 40/30 quad.
I replaced that. (hard to find) But I still have a problem. The radiant element on the left side actually has 3 elements in it. A round front, a bridge element and a round back element. The rear element is not working now. Everything else is fine. I would appreciate any advice on how to get that one working.

CroisanMountain · #2 (**permalink**) 12-15-2007, 02:51 PM

One element is not working. Any advice here?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE Radiant Range Glass stovetop chip	panfried	Oven Repair (including Ranges and Cooktops)	4	09-14-2008 04:15 PM
Magic Chef oven top element not working	charlotte	Oven Repair (including Ranges and Cooktops)	0	11-25-2007 10:42 AM
Bottom Element not working	Kevin G	Oven Repair (including Ranges and Cooktops)	0	11-08-2007 07:20 PM
Bake Element and BAKE cycle not working	jeffman	Oven Repair (including Ranges and Cooktops)	1	08-04-2007 11:18 PM
Jenn-Air Radiant Range with Convection Oven	Dee	Oven Repair (including Ranges and Cooktops)	0	07-24-2007 05:11 PM

Radiant Element not working

Oven Repair (including Ranges and Cooktops)

On Thanksgiving morning the radiant top and oven were working. At the end of Breakfast they quit. The clock, oven