Rank: Member
Groups: Registered
Joined: 4/11/2009(UTC) Posts: 1
|
I am having difficulty removing the door. The pins are flush with the bracket. I cannot find the door removal pins. The instructions call for 5/32" allen wrenches. Do you place them on the pins and then tap out with a hammer? I am probably being too cautious. Should I use some WD 40 or other lubricant? Thanks for any help.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/7/2008(UTC) Posts: 750
|
I think you open the door, look carefully at the hindge(near the pivot point) you should see a small hole, place a small round object(allen wrench) in the hole and GENTLY close the door until it stops,(PAY VERY CLOSE ATTENTION WHEN LIFTING THE DOOR OFF THE OVEN FRAME!!!!!) It can be VERY tricky to re-install.:)
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close