|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Jennair Range Switch Harness Replacement |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-22-2007, 10:46 AM
|
|||
|
|||
Jennair Range Switch Harness Replacement
Model Number: JGS 8850BDS Brand: Jenn-Air Age: 1 - 5 years
I can't figure out how to remove the control panel in order to reach the switch harness assembly. I removed the eight socket head sheet metal screws and the four flat head screws under the panel. It can move a bit, but won't come out. I'm afraid to force it. What's the trick? Thanks for any help you can provide.
    
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bosch On/Off Button&Switch Replacement | dkh | Dishwasher Repair | 3 | 12-13-2007 09:01 PM |
| ge fridge question..6 vs 4 wires into evap harness? | mpodols | Refrigerator & Freezer Repair | 1 | 11-21-2007 12:08 PM |
| Gas Range Door Glass Replacement | ronkat | Oven Repair (including Ranges and Cooktops) | 6 | 11-19-2007 07:54 PM |
| Glasstop replacement for range | jmgrlg | Oven Repair (including Ranges and Cooktops) | 1 | 10-14-2007 12:55 AM |
| Oven not working on JennAir range | darnote | Oven Repair (including Ranges and Cooktops) | 0 | 09-05-2007 09:05 AM |
Linear Mode
