Oven Repair (including Ranges and Cooktops)

Curt Galloway · #1 (**permalink**) 03-22-2009, 02:58 PM

All four stove top burners work. Attempts to program the clock or oven functions result in the incorrect time flashing on the display, or the entire array of characters flashing on and off. No oven heating at all. New 50 amp breaker installed in breaker panel. Line voltage is correct.

Gene · #2 (**permalink**) 03-23-2009, 03:06 PM

Most likely the problem is a bad control board. Be careful not to damage the overlay which has to be removed from the old control board and attached to the new one. Otherwise you'll have to buy it too. The black overlay is no longer available.

- The part number for the control board is AP2983574

- The part number for the white overlay is AP2983576

Here are the break down diagrams and Replacement parts for WHIRLPOOL RS385PXEB0 | AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Control Panel or Electronic Control - which causes blinking panel lights?	MarcLCH	Dishwasher Repair	1	02-25-2010 03:25 AM
GE Control Hood Switches Not Functioning	JAKMog	Oven Repair (including Ranges and Cooktops)	5	08-05-2009 10:35 PM
tranformer blew on control panel need specs for new transformer not control panel	kaydog2009	Oven Repair (including Ranges and Cooktops)	0	05-11-2009 07:22 AM
Replace control panel or just control panel housing?	Max Strano	Dishwasher Repair	1	08-26-2008 06:02 PM
Digital control oven	BWizer	Oven Repair (including Ranges and Cooktops)	4	02-04-2008 09:55 AM

digital control panel not functioning

Oven Repair (including Ranges and Cooktops)

All four stove top burners work. Attempts to program the clock or oven functions result in the incorrect time flashing