Rank: Member
Groups: Registered
Joined: 3/17/2009(UTC) Posts: 1
|
bottom oven works good top oven top element doesn't work not on broil or preheat - nothing at all what do I replace ?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/2/2007(UTC) Posts: 769
|
You could have a broil element ( AP2136555) that has failed and with a visual inspection, you may be able to see a break verifying the failure. If you don't find any visible signs, then a check with a multimeter could be taken by removing the element (after you shut the power off) and checking resistance between the two ends. An open circuit would be a sure indicator of a failure. You can also verify 240vac is measured between both sides of the element if you suspect a control board failure.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close