|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » replacing old burner with newer model |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: CVE1400 Brand: Jenn-Air Age: 5 - 10 years
One of our Jenn-Air elements stopped working when a loose part shorted it out. I ordered a replacement element, but the wiring in the new one is slightly different. I thing I know which wires go where, but would like to talk with someone who has done this kind of repair before and who could advise me so I do it correctly. Thanks!
Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
||||
|
What kind of a heating element are you talking about?
Per the break down diagram top heating elements (#5 and #6) are a simple plug in coils with two terminals. ![]() Gene.
__________________
Professional appliance repair in Orange County, California. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Burner flames too low after replacing gas valve/regulator | tgriz | Oven Repair (including Ranges and Cooktops) | 2 | 06-03-2009 01:47 PM |
| Oven burner correction on Model # from earlier post | StNick55 | Oven Repair (including Ranges and Cooktops) | 3 | 11-05-2008 05:38 PM |
| replacing Dacor Oven Model ECU | rehoff | Oven Repair (including Ranges and Cooktops) | 0 | 07-09-2008 08:38 AM |
| Replacing a glass top burner element | billy_mc | Oven Repair (including Ranges and Cooktops) | 1 | 06-15-2008 08:11 PM |
| replacing old burner with newer model | Ken H | Oven Repair (including Ranges and Cooktops) | 1 | 11-16-2007 11:06 AM |