Oven Repair (including Ranges and Cooktops)

tigerpilot · #1 (**permalink**) 07-30-2007, 03:44 PM

Maytag electric range CRE9600ACE. The oven is 175 degrees COLD at 450. (reads 275 on a good oven thermometer). Sensor resistance is O.K. (1100 ohms @ 85 degrees – 1600 ohms @350 degrees) Tested it in a different oven at 350 degrees. Grids glow in “Broil” and “Bake.” I am thinking the problem must be in the clock module.
Any other ideas cheerfully considered.
Thanks, Don

Adam / APP Team · #2 (**permalink**) 07-30-2007, 05:40 PM

It sounds like it may be one of the relays in the control. In this case you would have to get the clock control as one piece.

tigerpilot · #3 (**permalink**) 07-30-2007, 05:53 PM

Thanks...I am thinging of having rebuilt by CG industries. About $115
Thanks, Don

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Maytag problem	J-Reb	Dryer Repair	1	07-27-2007 09:23 PM
Noisy Maytag DW	Rocky Chiquera	Dishwasher Repair	2	07-27-2007 07:08 AM
not keeping cold or freezing	davidsargeant	Refrigerator & Freezer Repair	0	07-25-2007 06:39 PM
Electric Dryer too hot	jim k	Dryer Repair	3	07-25-2007 04:43 PM
Freezer no longer cold enough	clowder64	Refrigerator & Freezer Repair	1	07-25-2007 03:21 PM

Maytag electric over way too cold!

Oven Repair (including Ranges and Cooktops)

Maytag electric range CRE9600ACE. The oven is 175 degrees COLD at 450. (reads 275 on a good oven thermometer). Sensor