Oven Repair (including Ranges and Cooktops)

sdhwah · #1 (**permalink**) 11-12-2007, 10:23 AM

The bottom on everything I bake is burning. I removed foil from bottom. Looked at temp.sensor, seems in place and fine. Top element/broil is working fine. Any advise?

Is it worth fixing at this age or better to move on and buy new?

Many Thanks!!

Gene · #2 (**permalink**) 11-12-2007, 10:36 AM

Hi sdhwah

The first thing I would check is the oven temperature.

Place an oven thermometer in the middle of the oven, set it for 350 degrees and wait an extra 15 minutes after preheat is done.

Post the result.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
replacing bake element	staceymoore01	Oven Repair (including Ranges and Cooktops)	2	06-13-2008 11:25 PM
Matag Bake Element troubleshooting	jccouch1	Oven Repair (including Ranges and Cooktops)	1	11-12-2007 06:24 PM
element heats up on broil but not on bake	RICO	Oven Repair (including Ranges and Cooktops)	1	09-18-2007 08:24 PM
Bake Element Installation	HelpMeHelpMe	Oven Repair (including Ranges and Cooktops)	2	08-20-2007 04:00 PM
Bake Element and BAKE cycle not working	jeffman	Oven Repair (including Ranges and Cooktops)	1	08-04-2007 11:18 PM

Bake element problem?

Oven Repair (including Ranges and Cooktops)

The bottom on everything I bake is burning. I removed foil from bottom. Looked at temp.sensor, seems in place