Oven Repair (including Ranges and Cooktops)

tlynchard · #1 (**permalink**) 04-14-2011, 03:54 PM

Hello,

I have a GE Electric stove that we just replaced the ERC board on because one of the buttons broke. Everything else worked fine before. Now after the install, the oven keeps cycling through the lock and unlock cycle. It does make the clicking noise of the lock engaging. The oven wont turn on for more than 10 sec before the lock cycle starts and kicks out the oven setting. The only time it stops is when I can catch the stove unlocked and open it. Then the ERC board functions normally. As soon as the door closes, it starts all over again.

Any suggestions on how to fix this? I really need my stove to cook!!!

My model # is J DP39W0W2WW and the ERC board that we replaced is part # WB27T10174.

Thank you for your help!
Tracy

tlynchard · #2 (**permalink**) 04-15-2011, 12:32 PM

Please help me!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
maytag front loader door locks/slam door	m218perez	Washer Repair	5	10-26-2010 06:10 AM
door needs to be slammed so door locks	m218perez	Washer Repair	0	10-19-2010 08:40 PM
Oven locks but won't self-clean	MRRQUINN	Oven Repair (including Ranges and Cooktops)	3	01-15-2010 05:55 PM
kenmore oven shuts off and door locks	rbeck	Oven Repair (including Ranges and Cooktops)	0	05-24-2009 06:04 PM
oven door locks for no apparent reason	unhuh5591	Oven Repair (including Ranges and Cooktops)	1	11-05-2008 11:03 PM

Replaced ERC, now oven door locks continually

Oven Repair (including Ranges and Cooktops)

Hello, I have a GE Electric stove that we just replaced the ERC board on because one of the buttons