Oven Repair (including Ranges and Cooktops)

Ruben Lucero · #1 (**permalink**) 07-27-2007, 06:11 PM

my oven will not come on I get an F31 code on my control panel the manual recommends changing the RTD Probe which I did I still continue to get the same code after replacing the RTD probe. any suggestions or any advice

Admin / APP Team · #2 (**permalink**) 07-29-2007, 12:08 PM

Hi Ruben,

Check for shorted RTD harness between EOC (oven control) & Probe connector.

Let us know what you find.

Ruben Lucero · #3 (**permalink**) 07-29-2007, 07:46 PM

what is the easiest way to repair or replace the harness how could it short out could i replace the 2 purple wires only? or does the whole harness have to be replaced

Ruben Lucero · #4 (**permalink**) 08-01-2007, 03:39 PM

i checked the probe and the wires i have no short and the probe is good i noticed if i wiggled the probe connecter i sometines lose the reading i tried to use black tape to hold it so does not move it worked but once everything was put back together it still gave me a F-31 code what else could it be thanx

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frigidaire Gas Range	snudden4	Oven Repair (including Ranges and Cooktops)	3	02-07-2010 12:03 PM
Frigidaire Range	Stevevo	Oven Repair (including Ranges and Cooktops)	1	11-05-2009 04:53 AM
Frigidaire Range	madubo8	Oven Repair (including Ranges and Cooktops)	0	01-04-2009 06:08 AM
Frigidaire range	JudyD	Oven Repair (including Ranges and Cooktops)	1	05-23-2008 02:40 PM
Frigidaire Range	Schnidly	Oven Repair (including Ranges and Cooktops)	0	05-18-2008 06:26 AM

frigidaire range

Oven Repair (including Ranges and Cooktops)

my oven will not come on I get an F31 code on my control panel the manual recommends changing the