[lahearn]

4 plugs on left-hand side and three on element two are welded together and electric plugs won't go on it

part #12002144

[Joe / APP Team]

Originally Posted by lahearn

4 plugs on left-hand side and three on element two are welded together and electric plugs won't go on it

part #12002144

Lahearn,

You have the correct part for your range.
Part number: AP4009116

It has been updated and looks a bit different than the original.

The new burner has a permanently installed "jumper tab" from terminal 2a on the sensor to the common lead on the element.

To wire the new element assembly:
at the sensor box ,
Terminal 1A, single red wire, H1 wire from infinite switch.
Terminal 1B, double red wire, common to all 1B terminal on other burners.
Terminal 2A has the permanent jumper.
Terminal 2B , single red wire to "hot surface light".

at the element,
The Tan wire attaches to the terminal for the inner ring.
The Yellow wire attaches to the terminal for the outside ring.
The permanent jumper tab, is the common feed to both inner and outer rings.

You'll do fine,

Good Luck,