|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Bent gas oven door hinge |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: KGRS205TSS Brand: Kitchen Aid Age: Less than 1 year
Pressed on the door too hard while it was open and bent the hinge past where it should stop. Door doesn't want to close now. In the manual it states in order to remove the door.
To Remove: 1. Open oven door all the way. 2. Pull forward and down on the hinge latch on each side Well the hinge latch on the left side won't come down as it must be bent but the right latch will come down. Wife is going to kill me Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Refrigerator Inner Door Gasket Replacement - Hinges Bent? | RazorFish | Refrigerator & Freezer Repair | 2 | 07-16-2009 06:22 PM |
| Front Loader: How to reverse door swing / right hinge to left hinge | Three3walkers | Washer Repair | 3 | 05-31-2009 04:14 PM |
| Door Bent/Dryer not drying | edumomof4 | Dryer Repair | 1 | 03-18-2009 05:51 AM |
| oven door hinge broke,so did hinge post for top | Melodygmd | Oven Repair (including Ranges and Cooktops) | 1 | 12-30-2008 04:32 PM |
| Kenmore Door lock seems to be bent | cathy white | Dishwasher Repair | 0 | 12-06-2008 09:12 PM |